Sharp XV-Z15000 User Manual

-10
Projector (Rear View)
Using the Kensington Lock
This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System.
Refer to the information that came with the system for instructions on how to use it to secure the projector.
•
21
18
18
12
22
18, 19
18, 19
18, 20
COMPONENT terminals
Terminal for connecting video
equipment with component
output terminal.
HDMI1, 2 terminals
Terminal for connecting video
equipment with HDMI output
terminal.
RS-232C terminal
Terminal for
controlling the
projector using a
computer.
COMPUTER/COMPONENT
input terminal
Terminal for computer RGB and
component signals.
S-VIDEO input
terminal
Terminal for
connecting video
equipment with an
S-video terminal.
VIDEO input
terminal
Terminal for
connecting
video equipment.
Kensington Security
Standard connector
Remote control
sensor
Security bar
Terminals
Part Names and Functions (Continued)
Carrying handle
For carrying the projector.
AC socket
Connect the supplied
power cord.
Using the Carrying Handle
When transporting the projector, carry it by the carrying handle on the side.
Always close the lens shutter to prevent damage to the lens when transporting
the projector.
Do not lift or carry the projector by the lens as this may damage the lens.
•
•
XV-Z15000EUS.indb10XV-Z15000EUS.indb10 2008/12/2514:25:162008/12/2514:25:16

Sharp XV-Z15000 Specifications

General

Projection distance	3.14 - 3.63 m
Projection technology	DLP
Contrast ratio (typical)	-
Screen size compatibility	300 \
Projector native resolution	1080p (1920x1080)
Aspect ratio	4:3, 16:9
RS-232 ports	1
Dimensions (WxDxH)	403 x 115 x 341 mm
Digital zoom	1.15 x
Focal length range	21 - 24.2 mm
Lamp type	SHP
Lamp power	250 W
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
Audio (L/R) in	0
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN	No
Supported video modes	1035i, 1080i, 1080p, 480i, 480p, 576i, 576p, 720i, 720p
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL L, SECAM
Product color	Black
Market positioning	Home cinema
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Power consumption (typical)	353 W
Noise level	23 dB

Weight and Dimensions

Weight	5800 g