Sharp XV-Z15000 User Manual

-36
Picture Adjustment (“Picture” Menu)
Menu operation ⇒ Page 34
Picture
Picture Mode Standard
High Brightness
On
Off
Contrast
Bright
Color
Tint
Sharp
Red
Blue
CLR Temp
IRIS1 (Manual)
IRIS2 (Auto)
Eco+Quiet
Advanced
Reset
SEL./ADJ.
RETURN
ENTER
END
SIG-ADJ
SCR-ADJ
PRJ-ADJ
0
0
0
0
0
0
0
0
Selectable
items
Description
The main default settings of each item when selecting Picture Mode
CLR Temp Bright Boost
IRIS1
(Manual)
IRIS2 (Auto) Eco+Quiet
Standard For standard image 0 Off
High Brightness On Off
Natural A balanced color image is obtained. 0 Off
High Brightness Off Off
Dynamic A vivid image is obtained. 0 On
High Brightness Off Off
Movie1
For viewing images with the brightness
slightly toned down in a darkened
room
-1 Off High Contrast Off On
Movie2
For viewing images with the brightness
slightly boosted in a darkened room
-1 Off High Contrast On On
Game Use this when the audio and image
are not synched or when you want to
create a sharper image.
0On
High Brightness Off Off
• You can set or adjust each item in the “Picture” menu to your preference. Any changes you make are retained in memory.
Note
• You can also press PICTURE MODE on the remote control to select the picture mode. (See page 27.)
• The default settings are subject to change without notice.
Adjustment items
\ button | button
Contrast For less contrast. For more contrast.
Bright For less brightness. For more brightness.
Color For less color intensity. For more color intensity.
Tint For making skin tones purplish. For making skin tones greenish.
Sharp For less sharpness. For more sharpness.
Red For making images less reddish. For making images more reddish.
Blue For making images less bluish. For making images more bluish.
CLR Temp For making images slightly more reddish
(slightly warmer colors).
For making images slightly more bluish
(slightly cooler colors).
1 Selecting the Picture Mode
2 Adjusting the Image
This function allows you to select the picture mode that best suits the room brightness and the type of image being
projected.
IRIS2 (Auto)
Eco+Quiet
Advanced
Gamma
C.M.S.1 On
Off
Off
Auto
C.M.S.2
Bright Boost
Film Mode
Detail Enhance
Reset
SEL./ADJ.
RETURN
ENTER
END
0
0
Off
Off
DNR
MNR
XV-Z15000EUS.indb36XV-Z15000EUS.indb36 2008/12/2514:25:352008/12/2514:25:35

Sharp XV-Z15000 Specifications

General

Projection distance	3.14 - 3.63 m
Projection technology	DLP
Contrast ratio (typical)	-
Screen size compatibility	300 \
Projector native resolution	1080p (1920x1080)
Aspect ratio	4:3, 16:9
RS-232 ports	1
Dimensions (WxDxH)	403 x 115 x 341 mm
Digital zoom	1.15 x
Focal length range	21 - 24.2 mm
Lamp type	SHP
Lamp power	250 W
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
Audio (L/R) in	0
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN	No
Supported video modes	1035i, 1080i, 1080p, 480i, 480p, 576i, 576p, 720i, 720p
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL L, SECAM
Product color	Black
Market positioning	Home cinema
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Power consumption (typical)	353 W
Noise level	23 dB

Weight and Dimensions

Weight	5800 g