Setup
-15
Setting Up the Projector
Setting Up the Projector
For optimal image quality, position the projector perpendicular to the screen with the projector’s feet fl at and
level.
Note
• The projector lens should be centered in the middle of the screen. If the horizontal line passing through
the lens center is not perpendicular to the screen, the image will be distorted, making viewing diffi cult.
• For optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly
on the screen washes out the colors, making viewing diffi cult. Close the curtains and dim the lights when
setting up the screen in a sunny or bright room.
• A polarizing screen cannot be used with this projector.
Standard Setup (Front Projection)
■ Place the projector at the required distance from the screen according to the desired picture size.
Example of standard setup
Side View
Note
• Refer to page 17 for additional information concerning “Screen Size and Projection Distance”.
H
L
90°
Screen
Lens center
XV-Z15000EUS.indb15XV-Z15000EUS.indb15 2008/12/2514:25:182008/12/2514:25:18
To Next Page
Loading...
Need help?
General
Weight and Dimensions
