Sharp XV-Z15000 - Quick Start: Initial Setup Steps; Projector Placement and Power On

Quick Start
-13
Quick Start
This section provides an example showing how to connect the projector to video equipment that has an HDMI
output terminal with a brief explanation of the steps from connection through to image projection.
For details, see the pages suggested in each step.
1. Place the projector facing a screen
Page 15
2. Connect the projector to the video equipment and plug
the power cord into the AC socket of the projector
Pages 18-22
3. Open the lens shutter fully and then turn the projector on
Page 22
Press STANDBY/ON on the projector or ON on the
remote control pointing the remote control towards
the projector.
6 Adjustment feet
6 Focus ring
6 Zoom ring
7 STANDBY button
3 ON button
5 Input Mode
Select buttons
3, 7 STANDBY/ON
button
5 INPUT button
1
2
STANDBY/ON button
On the projector
2
ON button
On the remote control
XV-Z15000EUS.indb13XV-Z15000EUS.indb13 2008/12/2514:25:172008/12/2514:25:17