Sharp XV-Z2000 Service Manual

39
XV-Z2000
DT-400
Input the digital signal from INPUT5.
Select digital with the keys on the main body or the
remote control.
Check the Formatter unit.
Is the picture disturbed?
Is picture outputted?
Is the signal coming to pins (10)-
(77) of IC502?
YES NO
Check between the input terminals
and IC502.
NO
NO
YES
YES
Is the signal coming to pins (26)-
(54) and (66)-(94) of SC2001?
Check IC8001 and its peripheral
circuits.
NO
YES
Checking the digital input
End.
1
Input the analog RGB signal from INPUT5.
Select INPUT5 with the keys on the main body or the
remote control.
Check IC3102 and its peripheral
circuits.
Are pins (76), (77) and (78) of
IC3102 outputting and the signals
inputted to pins (73), (74) and (75)?
Is the picture disturbed?
Is picture outputted?
YES NO
NO
YES
NO
Is the picture signal coming to
pins (3), (4) and (5) of IC3102?
Check between the input terminals
and IC3102.
NO
YES
YES
Checking the analog RGB input
End.
1
3

Sharp XV-Z2000 Specifications

General

Projection distance	2.6 - 3.9 m
Contrast ratio (typical)	2500:1
Screen size compatibility	40 - 200 \
Projector native resolution	SXGA (1280x1024)
Lamp type	SHP
Lamp power	275 W
Light source type	Lamp
Service life of light source	3000 h
Video in	XGA, Mac 19” (in intelligent compression), SVGA/VGA, Mac 16”/13”
I/O ports	2x component, 1x RCA video, 1x S-video, DVI-I (analogue component, digital & analogue RGB) x 1
Dimensions (WxDxH)	310 x 287 x 104 mm
Power requirements	100-240V AC, 50/60Hz
Power consumption (typical)	360 W
Market positioning	Home cinema

Weight and Dimensions

Weight	4300 g