Shelly Wave Plug US User Manual

EN.
5
1. User and safety guide
1.1 Z-Wave® Plug US with power measurement
READ BEFORE USE
This document contains important technical and safety information about the Device, its safe
use and installation.
⚠CAUTION! Before beginning the installation, please read carefully and entirely this guide and
any other documents accompanying the Device. Failure to follow the installation procedures
could lead to malfunction, danger to your health and life, violation of law or refusal of legal
and/or commercial guarantee (if any). Allterco Robotics EOOD is not responsible for any loss or
damage in case of incorrect installation or improper operation of this Device due to failure of
following the user and safety instructions in this guide.
2. Terminology and Abbreviations
• Device - In this document, the term “Device” is used to refer to the Shelly Qubino device
that is a subject of this guide.
• Gateway (GW) - A Z-Wave® gateway, also referred to as a Z-Wave® controller, Z-Wave®
main controller, Z-Wave® primary controller, or Z-Wave® hub, etc., is a device that
serves as a central hub for a Z-Wave® smart home network. The term “gateway” is used
in this document.
• S button - The Z-Wave® Service button, located on Z-Wave® devices and is used for
various functions such as adding (inclusion), removing (exclusion), and resetting the
device to its factory default settings. The term "S button" is used in this document.
• Adding/Inclusion - The process of adding Z-Wave device to a Z-Wave network -
gateway. The words included, added, etc. are used in this regard.
• Removing/Exclusion - The process of removing Z-Wave device from a Z-Wave network -
gateway. The words excluded, removed, etc. are used in this regard.
• Learn mode - a state that allows the Device to receive network information from the
gateway.
3. About Shelly Qubino
Shelly Qubino is a line of innovative microprocessor-managed devices, which allow remote
control of electric circuits with a smartphone, tablet, PC, or home automation system. They
work on Z-Wave® wireless communication protocol, using a gateway. When the gateway is
connected to the internet, you can control Shelly Qubino devices remotely from anywhere.

Shelly Wave Plug US Specifications

General

Power supply	120 V ±10 %, 60 Hz
Power consumption	< 0.3 W
Power measurement [W]	Yes
Max switching voltage AC	140 V
Max switching current AC	15 A
Overheating protection	Yes
Overcurrent protection	Yes
Overvoltage protection	Yes
Distance	up to 40 m indoors (131 ft.) (Depends on local condition)
Shell material	Plastic
Color	White
Z-Wave repeater:	Yes
Z-Wave frequencies band(s)	908, 4
Maximum radio frequency power transmitted in frequency bend(s)	< 25 mW
CPU	Z-Wave S800
Compatible sockets	NEMA 5-15 (Type-B)
Compatible plugs	NEMA 1-15 (Type-A) and NEMA 5-15 (Type-B)
Ambient temperature	-20°C to 40°C / -5°F to 105°F
Humidity	30% to 70% RH
Max. altitude	2000 m / 6562 ft.

Weight and Dimensions

Size (H x W x D)	38x84x52 ±0.5 mm / 1.5x3.3x2.0 in ±0.02 in
Weight	70 ±1 g / 2.47 ±0.04 oz