EN.
6
Shelly Qubino devices can be operated in any Z-Wave® network with other Z-Wave® certified
devices from other manufacturers. All mains operated nodes within the network will act as
repeaters regardless of vendor to increase reliability of the network. Devices are designed to
work with older generations of Z-Wave® devices and gateways.
4. About the Device
The Device is a smart plug/outlet with power measurement and overheating protection, which
allows remote control of electrical appliances through a mobile phone, tablet, PC, or home
automation system.
Legend
A: Plug
B: S button
C: Socket
D: LED indication
5. Installation instruction
The Device is a smart plug suitable for controlling electrical house-hold appliances and
measuring their power consumption. It can be plugged into standard IEC Type B sockets and
accepts standard IEC Type B plugs.
⚠CAUTION! Use the Device only with a power grid and appliances that comply with all
applicable regulations. A short circuit in the power grid or any appliance connected to the
Device may damage it.
⚠CAUTION! Do not connect the Device to appliances exceeding the given max. load!
⚠CAUTION! Do not install the Device where it can get wet.