EasyManuals Logo

Sherwood RD-6502 User Manual

Sherwood RD-6502
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
ENGLISH
16
SURROUND SOUND
• This receiver incorporates a sophisticated Digital Signal Processor that allows you to create optimum sound
quality and sound atmosphere in your personal Home Theater.
DTS Digital Surround
DTS Digital Surround(also called simply DTS) is a
multi-channel digital signal format which can handle
higher data rates. Discs bearing the " "
include the recording of
up to 5.1 channels of digital signals, which can be
generally thought to provide better sound quality due
to the lower audio compression required.
It also provides wide dynamic range and separation,
resulting in magnificent sound.
"DTS", and "DTS Digital Surround" are registered
trademarks of Digital Theater Systems, Inc.
Dolby Digital
Dolby Digital is the multi-channel digital signal format
developed by Dolby Laboratories. Discs bearing the
“ ” includes the recording of up to 5. 1
channels
of digital signals, which can reproduce much better
sound quality, spatial expansion and dynamic range
characteristics than the previous Dolby Surround
effect.
Dolby Pro Logic II surround
This mode applies conventional 2- channel signals
such as digital PCM or analog stereo signals as well
as Dolby Surround signals, etc. to surround
processing to offer improvements over conventional
Dolby Pro Logic circuits. Dolby Pro Logic ll surround
includes 2 modes as follows:
• Dolby Pro Logic ll MOVIE
When enjoying movies, this mode allows you to
further enhance the cinematic quality by adding
processing that emphasizes the sounds of the
action special effects.
• Dolby Pro Logic ll MUSIC
When listening to music, this mode allows you to
further enhance the sound quality by adding
processing that emphasizes the musical effects.
Dolby Pro Logic
Dolby Pro Logic is a specially encoded two channel
surround format which consists of four channels
(front left, center, front right and surround). Sources
bearing the “ ” provide the
theater-like surround sound.
The surround channel is monaural, but is played
through two surround speakers.
Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories.
• The following modes apply conventional 2-channel
signals such as digital PCM or analog stereo
signals to high performance Digital Signal
Processor to recreate sound fields artificially.
MATRIX
This mode reproduces a delayed signals from the
surround channels to emphasize the sense of
expansion for music sources.
CHURCH
This mode provides the ambience of a church for
baroque, string orchestral or choral group music.
THEATER
This mode provides the effect of being in a movie
theater when watching a movie source.
HALL
This mode provides the ambience of a concert hall
for classical music sources such as orchestral,
chamber music, or an instrumental solo.
STADIUM
This mode provides the expansive sound field to
achieve the true stadium effect when watching
baseball or soccer games.
Surround modes
DOLBY
D I G I T A L
• When the EXTERNAL INs are connected to the 6 CH decoder for a surround sound such as Dolby Digital,
etc., you can enjoy the corresponding surround sound, too. (For details, see the operator’s manual of the
component to be connected.)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sherwood RD-6502 and is the answer not in the manual?

Sherwood RD-6502 Specifications

Amplifier Section IconAmplifier Section
power output in stereo mode2×100 W
total harmonic distortion0.09 %
intermodulation distortion0.1 %
input sensitivity280 mV
signal to noise ratio92 dB
frequency response+0 dB, -3 dB
output level TAPE REC280 mV
output level PRE OUT (Subwoofer)1.0 V
bass/treble control±10 dB
surround mode front power output125 W / 125 W
surround mode center power output125 W
surround mode surround power output125 W / 125 W
Digital Audio Section IconDigital Audio Section
sampling frequency32, 44.1, 48, 96 kHz
digital input level coaxial0.5 Vp-p
digital input level optical-15~-21 dBm
Video Section IconVideo Section
video formatPAL
input sensitivity (output level) video1 Vp-p
FM Tuner Section IconFM Tuner Section
tuning frequency range87.5~108 MHz
usable sensitivity12.8 dBf
46 dB quieting sensitivity mono/stereo20.2 / 45.3 dBf
signal to noise ratio mono/stereo55 / 50 dB
total harmonic distortion mono/stereo0.5 / 1.0 %
frequency response±3.0 dB
stereo separation30 dB
capture ratio4 dB
IF rejection ratio80 dB
AM Tuner Section IconAM Tuner Section
tuning frequency range522~1611 kHz
usable sensitivity500 µV/m
signal to noise ratio40 dB
selectivity25 dB
General IconGeneral
power supply230 V ~ 50 Hz
power consumption330 W
switched AC outletTotal 100 W (0.43A) max.
dimensions440×141×365 mm (17-3/8×5-1/2×14-3/8 inches)
weight9.5 kg (20.9 lbs)

Related product manuals