Shimadzu TOC-V - Connection to Server Personal Computer (Only in Client Personal Computer)

3 Network Shared Settings
3-9
3.3.2 Connection to server personal computer (only in client personal
computer)
1) In the client personal computer, start up The Shimadzu User Authentication Tool from
“Control Panel”.
Click the [Change Server] button.
Enter “Admin” for login after displaying the login menu.
2) Enter the name (or IP address) of the server personal computer to “Server name”, then
click the [OK] button.
3) When the message shown below is displayed, the setting of the client is completed.
After that, the user information is unitarily controlled by the server personal computer.