Shimadzu TOC-V - Add Event Log

3.2 System Administration Tool
3.2.7 Add Event Log
TOC-V Administrator’s Manual
30
3.2.7 Add Event Log
This function adds a comment to the operation history. This function is useful for
documenting items in the operation history, such as the replacement of catalyst, that
cannot be recorded automatically through the software. Only users with access rights to
Add Event Log can use this function.
This function can only be used if Audit Trail is selected in the Security dialog box (see
Section 3.2.4 “Security”).
Select Add Event Log in the TOC-Control V Administrator window to display the Add
Event Log dialog box.
Figure 3.23 Add Event Dialog Box
Select one of the items in the “Choose an item” box, and then enter a comment in the
Comment text field. If the Comment text field is left blank, an error message is
displayed, and the comment is not added to the Event Log.