Shimadzu TOC-V - Output and Viewing of the Data Profile

2.2 Explanation of System Administration Functions
2.2.2 Output and Viewing of the Data Profile
TOC-V Administrator’s Manual
8
2.2.2 Output and Viewing of the Data Profile
The TOC-Control V software is used to perform sample measurement, and to output a
Data Profile for each sample. The Data Profile includes the measurement data, the
calibration curve and the analysis method used, so that data integrity is maintained at
all times.
Reference: Refer to Section 3.4 “Data Profile” for information on how to display the Data Profile.
Figure 2.3 Data Profile Window