4.1 Installation Precautions
TOC-V Administrator’s Manual
42
4.1 Installation Precautions
The TOC-Control V software can be installed on PC’s running under Windows95,
Windows98, WindowsNT 4.0 (SP3 or later), Windows2000 or WindowsXP. In order to
maintain FDA 21 CFR Part 11 compliance, the software must be installed with
Windows2000 at this time. Install the software while Windows is running. Close all
other applications before beginning the installation procedure.
lWindows User Accounts
Error messages may be generated on computers using Windows2000 or WindowsNT if
the Windows user ID and password differ from the one used at the time of
TOC-Control V installation. The error message indicates that the database for the User
account could not be found.
To correct this situation, log into Windows using the same user ID and password used
for the TOC-Control V installation.
Windows ME
The Windows ME operating system has low stability and is unsuitable for controlling
analytical instruments like the TOC analyzer. Windows ME can cause abnormal
operation, and in the worst case, occasionally cause the operation to stop altogether. Do
not use the TOC-Control V software with Windows ME.
PC Power Management Settings
Disable the PC Power Management function to prevent shutdown of the PC and
interruption of instrument operations.
To Next Page
Loading...
