Shimadzu TOC-V - Configuration

2 Shimadzu User Authentication Tool
2-3
2.1.3 Configuration
Click the [Configuration] button to display the <Login check> screen.
Enter “Login ID” and “Password” and click the [OK] button to display the <Configuration of
user authentication tool> screen.
Click the [Cancel] button to cancel login.
Click the [Help] button to display the <Help> screen.
2.1.3.1 Configuration setting of user authentication tool
Set the configuration of the User Authentication Tool.
If the User Authentication Tool is shared by two or more Shimadzu applications, setting
changes are effective to all Shimadzu applications.
- <Configuration of user authentication tool> screen -
1) Minimum password length: (0 to 14 characters)
Set the minimum number of characters required in the password.
[NOTE]
When the minimum length of password is changed, this setting become effective at
the next time of changing password.