Shimadzu TOC-V - TOC-Control V Main Menu

3.1 TOC-Control V Main Menu
TOC-V Administrator’s Manual
12
3.1 TOC-Control V Main Menu
To start the TOC-Control V software, select Start > Programs > TOC-Control V.
The TOC-Control V Main Menu window is displayed.
Figure 3.1 TOC-Control V Main Menu Window
The TOC-Control V software is made up of several modules. These modules are
accessed by double-clicking the corresponding icons in the Main Menu window. The
User dialog box shown below is displayed to enable module access.
Figure 3.2 User Dialog Box
To gain access to the module the first time the program is executed, enter the following
default user information, and click OK.
User ID: Admin
Password: Do not enter anything.
Note: To maintain security, use the procedure in Section 3.2.6 “Change Password”
to change the “Admin” password after the first use of the program.