Shimadzu TOC-V - Program Test (S;W Validation)

3.2 System Administration Tool
3.2.3 Program Test (S/W Validation)
21
TOC-V Administrator’s Manual
3.2.3 Program Test (S/W Validation)
The S/W Validation function verifies that the TOC-Control V program files have not
been modified since installation. The TOC-Control V program files consist of
executables, DLL files and Help files. This function can be used only by users having
access rights to S/W Validation.
Select S/W Validation in the TOC-Control V Administration Tool window to open the
TOC-V Program Test dialog box.
Figure 3.9 TOC-V Program Test Dialog Box
Click Start to initiate the program file check. When all the files of a particular type are
checked, the results are displayed in the Name, Path, Size, Checksum, and Version
columns to the right.
Click Report to print the results.
Click Close to close the Program Test dialog box.