3.2 System Administration Tool
3.2.1 User Accounts
TOC-V Administrator’s Manual
16
Command Description
User ID (required) Enter a User ID in this text box. The User ID can contain
a maximum of 30 characters.
User Name (required) Enter a User Name in this text box. The User Name can
contain a maximum of 60 characters.
Password (required) Enter a password in this text box. The length and other
conditions for the password are specified in the
Shimadzu User Authentication Tool > Configuration >
User Authentication Tool Configuration Settings. Refer
to the Shimadzu User Authentication Tool instruction
manual for instructions. The password is encrypted and
is displayed with asterisks (*).
Confirm New Password
(required)
To verify the password, carefully type into the Verify
Password text box the same password entered in the
password text box. The password is case sensitive.
Company, Department,
Position, Tel. Number,
E-mail Address, etc.
Enter these items, as necessary.
User Level Select the appropriate radio button to set a User Level.
• Administrator
• Main User
• User
• Guest
Default access rights for each user level are displayed.
Create / Edit User Accounts and Security Setting access
rights items cannot be deleted from the Administrator
User Level or added to any other User Level.
Access Rights The administrator can select the functions accessible to
each user. Each of the 4 user levels is provided with
certain default access rights. (Refer to Table 3.1
“Default Access Rights”) The administrator can assign
or remove access rights from Main User, User or Guest
levels. The administrator has complete access as the
default.
To Next Page
Loading...
