2 Shimadzu User Authentication Tool
2-14
2.1.6.1 Extraction Condition
Click the [Condition] button to display the <Extraction Condition> screen.
On this screen, the event log extraction condition can be set. For example, if there are too
many lines in the default status and the screen is difficult to look at, use this screen.
Set each target check item to ON, and enter the extraction condition in the text box on the
right side. If two or more check items are set to ON, event logs which satisfy all the
conditions are extracted.
- <Extraction Condition> screen -
1) Period
Set the event log period of the data to be extracted.
Check the check box to enable the combo box for operation.
Drop down the combo box to display the calendar.
2) User
Enter the user ID of the data to be extracted and displayed.
3) User full name
Enter the user name of the event logs to be extracted.
The entire full name does not have to be input.
The logs of the user names including the input characters are extracted and
displayed.
4) Result
Among “OK”, “WN” and “NG”, select the result of the data to be extracted.
To Next Page
Loading...
