Shimax MAC6A User Manual

87
Control
(1) Control method
(2) Number of PID
(3) Number of Zone
(4) Zone hysteresis
(5) Proportional band (P)
(6) ON-OFF Differential gap(H)
(7) ON-OFF Differential gap(L)
(8) Integration time(I)
(9) Differential time(D)
(10) Manual reset
(11) Dead band
(12) Output limiter
(13) Soft start
(14) Control output characteristic
(15) Proportional period
(16) Output renewal period
(17) Manual output
(18) FlexPID setting method (ABC)
2mode PID method with Auto tuning +Zone PID method or ON-OFF operation
Max 8
Max 4
0～10000 units
OFF ,0.1～1000.0 FS (On – Off operation by OFF setting)
1～10000 Units
1～10000 Units
OFF ,1～6000s (P or OD operation by OFF setting)
OFF ,1～3600s (P or PI operation by OFF setting)
±50.0%(Effective at I=OFF)
-20000～30000 Units
(L) 0.0～99.9% (H)0.1～100.0% (resolution 0.1)
OFF, 0.1～300.0s (resolution 0.1)
Possible to choose from RA(Heating) or DA(Cooling)
0.5～300.0s (resolution 0.5)
Same as sampling period (50,166.7,250,500m sec)
0.0～100.0% ( resolution 0.1)
0.00～1.00
Control Output 1
（1） Contact
（2） Voltage pulse(SSR drive)
（3） Current
（4） Voltage
（5） Contact(Servo)
（6） ＳＳＲ(Servo)
（7） Accuracy
（8） Resolution
Normal open（１ａ） ２４０Ｖ ＡＣ ２Ａ（resistance load）
１２ＶＤＣ －１～＋１．５Ｖ （Max ２０ｍＡ）
４－２０ｍＡ（load resistance ５００Ω ） Load regulation ０．２％ＦＳ
０－１０Ｖ（Max load ２ｍＡ）
Normal open（２ａ） ２４０Ｖ ＡＣ ２Ａ
2 circuits of Triode AC switch ２４０Ｖ ＡＣ １．５Ａ
±１．０％FS（５～１００％ Output）
About １／５００００
Control Output 2
（1）～（4）
（5）～（6）
（7）
Same as Control Output 1（Exclusive selection option of Servo output）
No function
Resolution :About 1/50000

Shimax MAC6A Specifications

General

Brand	Shimax
Model	MAC6A
Category	Controller
Language	English