Shini SD-H Series User Manual

12(83)
1.3 Technical Specifications
1.3.1 Specifications
Table 1-1：Specifications
Model SD-
40H 80H 120H 200H 400H 700H 1000H 1500H 2000H 3000H 4000H
Regen. Heater (kW)
4 3 3 4 7.2 10 15 28 28 32 56
Regen. Blower
(kW，50 / 60Hz)
0.2 /
0.3
0.2 /
0.3
0.2 /
0.3
0.4 /
0.5
0.75 /
0.9
1.5 /
1.8
2.4 /
3
5.5 /
6.3
5.5 /
6.3
9 /
11
5.5×2 /
6.3×2
Process Heater*
(kW)
4 6 6 12 18 24 32 58 80 96 128
Process Blower
(kW，50 / 60Hz)
0.12 /
0.12
0.75 /
0.9
0.75 /
0.9
1.5 /
1.8
3.75 /
4.5
5.5 /
6.3
9 / 11
9×2 /
11×2
13×2 /
15×2
13×3 /
15×3
13×4 /
15×4
Dry Air Capacity
(m
3
/ hr，50 / 60Hz)
40 / 45 80 / 95
120 /
130
200 /
220
400 /
450
700 /
780
1000 /
1150
1500 /
1750
2000 /
2300
3000 /
3400
4000 /
4500
Pipe Dia. (inch)
2 2 2 2.5 3 4 5 6 8 8 12
Cooling Water
Quantity (L/min)
5 10 15 30 50 80 120 180 240 360 480
Dimensions
H (mm) 1260 1360 1360 1560 1745 1935 2145 2060 2060 2240 2060
W (mm) 510 530 530 660 700 900 1300 1410 1410 2035 2750
D (mm) 860 820 820 1050 1255 1380 1550 2150 2150 2160 2250
Weight (kg) 145 170 170 265 330 480 700 1010 1300 1600 2200
Note：1) "*" Stands for drying heater is optional equipment We reserve the right to change
for working with "European type" hoppers. specifications without prior notice.
2) If equipped with drying heater and temp. controller,
the model code should be followed by "PHC"
(For example: SD-XXH-PHC).
3) For dew-point monitor install on the machine,
add "D" at model behind.
4) Power：3Ф, 230 / 400 / 460 / 575VAC, 50 / 60Hz.

Shini SD-H Series Specifications

General

Brand	Shini
Model	SD-H Series
Category	Dehumidifier
Language	English