50(83)
"ENTER" to confirm the new parameter.
Picture 2-23：Process temp. Parameters Setting 2
The max. and min. display area of the numeric keypad shows the present max.
and min. setting value. If the setting value exceeds the limits, it would be invalid
to press "ENTER".
P.I.D. control: When temperature control is inaccurate, users can manually
adjust temp. control parameters to achieve the best temperature control effect.
Adjustment of Proportion (P)
Table 2-14：Adjustment of Proportion (P)
Adjustment of Integral Time (I)
Table 2-15：Adjustment of Integral Time (I)
To Next Page
Loading...
Need help?
General
