Shopsmith Mark VII - Page 64

Mark VII Restored Manual - V1.02 – Donated without cost to the world-wide Shopsmith Community - Everett L. Davis 2016 64
PM6
19
501332
Bracket - Control Assembly
PM6
20
501912
Catch - Bullet (3/8)
PM6
21
501883
Stop - Plate
PM6
22
448013
Screw - Tapping (No. 8-32 x 1/2 Pan Hd.)
PM6
23
502792
Assembly - Control Knob (Includes #455532, Pin - Roll)
PM6
24
501683
Assembly - Medallion
PM6
25
501478
Ring - Retaining (7/16, External)
PM6
26
455532
Pin - Roll (1/8 x 1/2)
PM6
27
447823
Screw - Tapping (No. 10-24 x 1/2 Pan Hd.)
PM6
28
121801
Lockwasher - Internal Tooth (No. 10)
PM6
29
501246
Bracket - Worm
PM6
30
503865
Screw - Tapping (1/4-20 x 1/2 Hex Hd.)
PM6
31
120393
• Washer (5/16 Norn.)
PM6
32
120395
• Washer (7/16 Norn.)
PM6
33
501646
Key - Hypro
PM6
34
501241
Worm
PM6
35
501365
Spacer - Lock
PM6
36
501222
Stop - Lock
PM6
37
501218
Hub - Handle
PM6
38
501685
Assembly - Lock Handle
PM6
39
501599
Spring - Hub
PM6
40
273436
Pin - Roll (1/8 x 11/16)
PM6
41
447213
Screw - Tapping (No. 8-32 x 1/2 Flat Hd.)
PM6
42
501243
Wedge - Lock
PM6
43
501240
Shaft - Lock
PM6
44
504490
Spacer Tube-Spring
PM6
45
501242
Spring
PM6
46
443334
Nut - Hex (5/16-24 Flexloc)