8. Playback Parameters
This option lets you set parameters for a shape stored in a playback/scene. When a scene fades in, you
can determine whether the shape should start at full size and speed instantly, (Static) or whether the
shape speed and/or size should fade in as well (Timed).
01) Press <Shape>.
02) Press <E> [Playback Parameters].
03) Press the playback button of the playback which you want to set parameters for.
04) <A> set the size to Static or Timed.
05) <B> set the speed to Static or Timed.
06) <C> allows you to remove the offset caused by a shape when it is stopped. When you turn off a
scene with a shape, the fixtures will be offset by the last state of the shape. Setting this option to
“Removed” causes the fixture to return to its programmed settings. Setting this option to “Remains”
leaves the shape offset in place.
To Next Page
Loading...
