9 Setup
Press <Setup> to enter Setup menu. In the menu, you can implement data back-up, loading, data
erasing, language selection, library management, user settings and version information.
1. Save & Load
To save data to and load data from a USB memory stick.
Save data: Enter Save Data menu, turn the Wheel V to set the characters. Press <Up> and <Down>
to move the cursor. Press <Delete> to delete a character. After naming, insert a USB memory stick
and press <Enter> to save the data.
Load data: Insert a correct USB memory stick. Select the desired data from the list that appears on
the screen. Press <Up
> and <Down> to browse
. Press <A-E> t
o select the desired opt
ion.
2. Wipe Data
Wipe Playback: Only the data in the playback area will be wiped off. Other data will remain.
Wipe Palette: Only the data in the palette area will be wiped off. Other data will remain.
Wipe All: Data of playback, palette and patch will all be wiped off. But, the library data will remain.
3. Select Language
There are two language versions available on the Creator: Chinese and English.
4. Personality Management
Delete Personality
A maximum of 50 personalities can be saved on the console. To add a new personality when there are
already 50 personalities on it, delete one of the old personalities first.
01) Enter Delete Personality menu.
02) Press <Up> or <Down> to browse.
03) Select the desired personality.
04) Press <Enter> to delete.
Delete All Personality
All personalities will be deleted from the console.
Update Personality
01) Insert a correct USB memory stick.
02) Press <Setup>.
03) Press <D>, to start reading personality libraries.
04) Select the desired personality to add.
05) Once updated, the line will be highlighted.
Edit Personality
01) Press <D> [Edit Personality].
02) Turn the Wheel V to modify the characters. Press <Up and <Down> to move the cursor. Press
<Delete> to delete character.
03) After naming the file, press <Enter> to enter Channels Number menu.
04) Turn the Wheel V to modify the channel naumber or press a fixture button to enter the channel
number. Press <Enter> to enter Channel Edit Menu.
05) Select the desired channel which should be edited. Once selected, the option will be highlighted.
Press an attribute button to assign the desired attribute to the channel. If it is not a fine-tone channel,
press the option button again to enter Advanced Channel Setting Menu.
06) In Advanced Channel Setting Menu, turn the Wheel B to modify the characters. Press <Up> and
<Down> to move the cursor. Press <Delete> to delete a character. Press <B> to change the attribute
type. Press <C> to change the channel type. Turn the Wheel V to change the locating value of the
channel. Press <D> to edit the reverse status of the channel.
07) When finished, press <Exit> to return to the previous menu.
08) Repeat step 5 until you have edited all the channels. Press <Enter> to enter Macro menu.
To Next Page
Loading...
