09) In Macro menu, select the macro which should be edited. Turn the Wheel B or press a fixture button
to enter a channel number. Turn the Wheel V to enter a function value. After editing the macro
command, press <Enter> to save the created/edited personality.
5. Show Record
Please, see page 35.
6. User Settings
01) Press <Up> or <Down> to turn the pages.
02) Choose one of the following options:
Save Pal.: Choose between Not Link Attribute and Link Attribute. While saving a palette, you can
select to link it to an attribute or not. If you have chosen Link Attribute, only the data in the
selected attributes will be saved. If you have chosen Not Link Attribute, all the data will be
saved.
Use Pal.: Choose between Not Link Attribute and Link Attribute. While loading a palette, you can
select to link it to an attribute or not. If you have chosen Link Attribute, only the data in the
selected attributes will be loaded. If you have chosen Not Link Attribute, all the data will be
loaded.
MIDI (Disable/Master/Slave): If set to Disable, the Creator will not respond to MIDI signals. If set to
Master, the Creator will send MIDI signals to other devices. If set to Slave, the Creator will only
receive MIDI signals and the playback section will respond only to MIDI signals.
MIDI Channel (1-16): Set the number of MIDI channels.
Palette Page (ON/OFF): If set to ON, the palettes will be linked to pages. This way, you can save
up to 80 palettes (4 pages x 20 palette buttons). If set to OFF, the palettes will not be linked to
pages. This way, the maximum number of palettes will be limited to 20, as there are 20 palette
buttons.
Wheel accele.: You can set the wheel reaction time. Choose between Fast, Normal and Slow.
Blackout Output (HTP/All): If set to HTP and you press <Blackout>, only the HTP channel values will
be set to 0. If set to All and you press <Blackout>, all the channel values will be set to 0.
7. Update of the IC on the Output PCB
To update the IC on the Output PCB:
01) Copy the updated file to a USB memory stick. Insert the USB memory stick into the console.
02) Select the related option to start updating.
8. System information
01) Press <Setup>.
02) Press <Up>/<Down>. Press <C> ou will see System Information. You can view the current software
version.
Console Lock
01) In order to lock the Creator, to prevent any unwanted adjustments carried out by third parties, press
and hold down <Setup> and <M.L. Menu> for 3 seconds.
02) The Creator will now be locked. To unlock, repeat step 1.
Updating
01) Copy the CR102PUD.bin update file to the root directory of a FAT32 USB memory stick.
02) Power off the Creator.
03) Insert the USB memory stick to the USB slot on the console.
04) Power on. The console will automatically find the update file on the USB memory stick. The display will
show “Found Update File”
05) Press <Enter> to start updating. Do not power the Creator off, while the update is running.
06) Once the Creator has been updated, it will reboot automatically.
07) Press the Setup button to view the current software version.
To Next Page
Loading...
