SHOWTEC Creator 2048 - Save;Load a Show; Save Show List; Load Show List; Save a Single Show

36
Ordercode: 50732
Creator 2048
4. Save/Load a Show
Save Show List
01) Press <Setup>.
02) Press <E> [Show Record] and insert a USB memory stick.
03) Press <C> [Save Show List].
04) Turn the Wheel V to modify the characters. Press <Up> and <Down> to move the cursor. Press
<Delete> to delete a character.
05) After naming the file, press <Enter> to save.
Load Show List
01) Press <Setup>.
02) Press <E> [Show Record] and insert a USB memory stick.
03) Press <D> [Load Show List].
04) Select the desired show list and press <Enter> to start loading.
Save a Single Show
01) Press <Setup>.
02) Press <E> [Show Record] and insert a USB memory stick.
03) Press <A> [Show List] and select the show.
04) Press <E> [Save&Load Show] and press <A> [Save Show].
05) Turn the Wheel V to modify the characters. Press <Up> and <Down> to move the cursor. Press
<Delete> to delete a character.
06) After naming the file, press <Enter> to save.
Load a Single Show
01) Press <Setup>.
02) Press <E> [Show Record] and insert a USB memory stick.
03) Press <A> [Show List] and select the show.
04) Press <E> [Save&Load Show] and press <B> [Load Show].
05) Press <Enter> to load.