CueList
CueList is a series of playbacks saved on a playback fader. When we move a CueList fader, then, all the
playbacks in it will be activated. CueList provide conveniences for light shows.
1. Save a CueList
01) Press <CueList>.
02) Flashing playback button means that there are no existing playbacks on it. Press the desired one to
save the CueList.
03) The screen menu shows the total steps and the current step number.
04) Move up the faders of the playbacks you want to include. Press the current playback button to save.
05) Repeat step 4.
06) Press <Exit> to quit.
2. Edit a CueList
In order to edit an existing CueList:
01) Press <CueList>.
02) Press the desired playback button.
03) Press <Up>/<Down> to select a step to edit.
04) Move up the faders corresponding with the playbacks which you want to include.
05) Press the current playback button to overwrite or insert.
Delete Step: Select a step, press <Delete>, then press [Enter] to confirm.
Edit Step Time: Select a step, press <Time Mode> to edit step time.
View Step Data: Select a step, press <Copy/Include> to include the step data.
3. Run a CueList
Move up a playback slider or press a playback button to run a CueList.
One playback runs only one CueList.
The default time of CueList is 0 and Link is set to OFF, so you have to press <Go+> or <Go-> to run it
manually.
4. Delete a CueList
Deleting a cue list is similar to deleting a chase:
01) Press <Delete>.
02) Press the CueList button twice.
5. Copy a CueList
In order to copy a CueList:
01) Press <Copy/Include>.
02) Press a CueList button with an existing cue list.
03) Press an empty playback button to copy.
6. Set Global Time
To set global time for a CueList:
01) Press <Time Mode>, then press the desired CueList button.
02) Press <Up>/<Down> to browse, press <A>-<E> to select an option. Turn the Wheel V to set the values.
The Link option is on Page 2. If Link is set to ON, the chases will automatically run step by step. If Link is
set to OFF, then you have to press <Go+> or <Go-> to run the steps.
03) Once you have made all the necessary changes, press <Enter> twice to save and exit.
For CueList, it is enough to set only the LTP time.
To Next Page
Loading...
