Shure Incorporated
12/87
Connect the Dante audio processor to the network switch to provide:
• Digital signal processing (acoustic echo cancellation)
• Digital-to-analog conversion to deliver Dante audio over an analog (VOIP or telephone line) output.
• Analog-to-digital conversion to deliver analog audio from the far end onto the Dante network.
④ Connection to far end
Connect the output from the audio processor to a VOIP server or telephone line to deliver audio between the near
end and far end.
⑤ Audio from far end to amplifier
Route the far end audio through the audio processor output to an amplifier.
⑥ Amplified audio signal to loudspeakers
Connect the loudspeakers to the amplifier to deliver the audio from the far end.
To Next Page
Loading...
