Shure MXA910 - Page 60

Shure Incorporated
60/87
Get Post-Gate Audio Gain (firmware > v3.0)
Command String:
< GET x AUDIO_GAIN_POSTGATE >
Where x is ASCII channel number: 1
through 8. Channel number 0 (all
channels) is not valid for this com
mand.
MXA910 Response:
< REP x AUDIO_GAIN_POSTGATE yyyy >
Where yyyy takes on the ASCII val
ues of 0000 to 1400. yyyy is in steps
of one-tenth of a dB.
Set Post-Gate Audio Gain (firmware > v3.0)
Command String:
< SET x AUDIO_GAIN_POSTGATE yyyy >
Where x is ASCII channel number: 1
through 8. Where yyyy takes on the
ASCII values of 0000 to 1400. yyyy
is in steps of one-tenth of a dB.
MXA910 Response:
< REP x AUDIO_GAIN_POSTGATE yyyy >
Where yyyy takes on the ASCII val
ues of 0000 to 1400.
Increase Post-Gate Audio Gain by n dB (firmware > v3.0)
Command String:
< SET xx AUDIO_GAIN_POSTGATE INC nn >
Where xx is ASCII channel number:
1 through 8. Where nn is the
amount in onetenth of a dB to in
crease the gain. nn can be single
digit ( n ), double digit ( nn ), triple
digit ( nnn ).
MXA910 Response:
< REP xx AUDIO_GAIN_POSTGATE yyyy >
Where yyyy takes on the ASCII val
ues of 0000 to 1400.
Decrease Post-Gate Audio Gain by n dB (firmware > v3.0)
Command String:
< SET xx AUDIO_GAIN_POSTGATE DEC nn >
Where xx is ASCII channel number:
1 through 8. Where nn is the
amount in onetenth of a dB to de
crease the gain. nn can be single
digit ( n ), double digit ( nn ), triple
digit ( nnn ).
MXA910 Response:
< REP xx AUDIO_GAIN_POSTGATE yyyy >
Where yyyy takes on the ASCII val
ues of 0000 to 1400.