Shure MXA910 - Page 61

Shure Incorporated
61/87
Get Echo Reduction Reference Channel Audio Gain (firmware > v3.0)
Command String:
< GET AUDIO_GAIN_ECHO_RED >
MXA910 Response:
< REP AUDIO_GAIN_ECHO_RED yyyy >
Where yyyy takes on the ASCII val
ues of 0000 to 1400 representing
gain from -109.9 dB to 30.0 dB. yyyy
is in steps of one-tenth of a dB .
Set Echo Reduction Reference Channel Audio Gain (firmware > v3.0)
Command String:
< SET AUDIO_GAIN_ECHO_RED yyyy >
Where yyyy takes on the ASCII val
ues of 0000 to 1400 representing
gain from -109.9 dB to 30.0 dB. yyyy
is in steps of one-tenth of a dB.
MXA910 Response:
< REP AUDIO_GAIN_ECHO_RED yyyy >
Increase Echo Reduction Reference Channel Audio Gain (firmware > v3.0)
Command String:
< SET AUDIO_GAIN_ECHO_RED INC yyyy >
Where yyyy takes on the ASCII val
ues of 0000 to 1400 representing
gain from -109.9 dB to 30.0 dB. yyyy
is in steps of one-tenth of a dB. The
resulting gain must be within the al
lowed range.
MXA910 Response:
< REP AUDIO_GAIN_ECHO_RED yyyy >
Decrease Echo Reduction Reference Channel Audio Gain (firmware > v3.0)
Command String:
< SET AUDIO_GAIN_ECHO_RED DEC yyyy >
Where yyyy takes on the ASCII val
ues of 0000 to 1400 representing
gain from -109.9 dB to 30.0 dB. yyyy
is in steps of one-tenth of a dB. The
resulting gain must be within the al
lowed range.
MXA910 Response:
< REP AUDIO_GAIN_ECHO_RED yyyy >
Get Echo Reduction Level (firmware > v3.0)