Shure MXA910 - Page 70

Shure Incorporated
70/87
MXA910 Response:
< REP DEV_LED_IN_STATE OFF >
< REP DEV_LED_IN_STATE ON >
The MXA910 will respond with one
of these strings.
Set LED State
Command String:
< SET DEV_LED_IN_STATE OFF >
< SET DEV_LED_IN_STATE ON >
Send one of these commands to the
MXA910.
MXA910 Response:
< REP DEV_LED_IN_STATE OFF >
< REP DEV_LED_IN_STATE ON >
The MXA910 will respond with one
of these strings.
Get LED Brightness
Command String:
< GET LED_BRIGHTNESS >
MXA910 Response:
< REP LED_BRIGHTNESS n >
Where n can take on the following
values:
0 = LED disabled
1 = LED dim
2 = LED default
Firmware > v3.0:
0 = LED disabled
1 = 20%
2 = 40%
3 = 60%
4 = 80%
5 = 100%
Set LED Brightness