Shure MXA910 - Page 75

Shure Incorporated
75/87
MXA910 Response:
< REP x BEAM_Z nnn >
Get Beam (Lobe) Width
Command String:
< GET x BEAM_W >
MXA910 Response:
< REP x BEAM_W nnnn >
Where nnnn can be WIDE,
MEDIUM, or NARROW
Set Beam (Lobe) Width
Command String:
< SET x BEAM_W nnnn >
Where nnnn can be WIDE,
MEDIUM, or NARROW
MXA910 Response:
< REP x BEAM_W nnnn >
Reboot MXA910 (firmware > v2.0)
Command String:
< SET REBOOT >
MXA910 Response: The MXA910 does not send a re
sponse for this command
Get Error Events (firmware > v2.0)
Command String:
< GET LAST_ERROR_EVENT >
MXA910 Response:
< REP LAST_ERROR_EVENT {yyyyy} >
Where yyyy can be up to 128 char
acters.
Get Low Shelf Filter (firmware v2.0 only)
Command String:
< GET LOW_SHELF_FILTER >