Shure MXA910 - Page 76

Shure Incorporated
76/87
MXA910 Response:
< REP LOW_SHELF_FILTER ON >
< REP LOW_SHELF_FILTER OFF >
The MXA910 will respond with one
of these strings.
Set Low Shelf Filter (firmware v2.0 only)
Command String:
< SET LOW_SHELF_FILTER ON >
< SET LOW_SHELF_FILTER OFF >
< SET LOW_SHELF_FILTER TOGGLE >
Send on of these commands to the
MXA910
MXA910 Response:
< REP LOW_SHELF_FILTER ON >
< REP LOW_SHELF_FILTER OFF >
The MXA910 will respond with one
of these strings.
Command String:
< SET LOW_SHELF_FILTER >
MXA910 Response:
< REP LOW_SHELF_FILTER ON >
< REP LOW_SHELF_FILTER OFF >
The MXA910 will respond with one
of these strings.
Get Bypass All EQ (firmware > v3.0)
Command String:
< GET BYPASS_ALL_EQ >
MXA910 Response:
< REP BYPASS_ALL_EQ sts >
Where sts can be:
• ON
• OFF
Set Bypass All EQ (firmware > v3.0)
Command String:
< SET BYPASS_ALL_EQ sts >
Where sts can be:
• ON
• OFF
• TOGGLE
MXA910 Response:
< REP BYPASS_ALL_EQ sts >
Where sts can be:
• ON
• OFF