Shure Incorporated
19/70
◦
◦
1.
2.
3.
4.
•
•
•
Indicates power switch is disabled
③ Transmitter Audio Muted Indicator
Displayed when the transmitter audio is set to off using the MUTE MODE feature.
④ Battery Runtime Indicator
Shure SB900 battery: runtime is displayed in hours:minutes remaining
AA Batteries: runtime is displayed with a 5-bar indicator
⑤ Menu Lock Indicator
Indicates menu navigation buttons are disabled
⑥ Mic. Offset
Displays microphone offset gain value
⑦ RF Power
Displays RF power setting
⑧ Bodypack Input Pad
The input signal is attenuated 12 dB
⑨ Encryption Icon
Indicates encryption is enabled on the receiver and has been transferred to the transmitter from a sync
Adjusting Receiver Display Brightness and Contrast
Adjust BRIGHTNESS and CONTRAST settings to improve visibility in challenging lighting environments.
From the receiver menu: DEVICE UTILITIES > DISPLAY
Press the control wheel to select CONTRAST or BRIGHTNESS.
Turn the control to adjust the selected parameter.
Press ENTER to save changes.
Editing Receiver Channel Name
To edit a receiver channel name, choose EDIT NAME from the menu.
Turn the control wheel to edit a highlighted character
Press the control wheel to advance to the next character
Press ENTER to save changes
Note: The channel name is transferred to a transmitter during a sync.
Receiver Menu Descriptions
RADIO
Displays Group, Channel, Frequency, and TV information. Use the control wheel to edit values
G:
To Next Page
