- 9 -
-
AGP Expansion Slots
Provides one 32-bit AGP slot which supports 4X AGP devices.
-
CNR Expansion Slot
Provides one CNR (Communication/ Network Riser) slot.
-
6 USB 2.0 Interface Onboard
Ø 2 USB connectors on back-panel and two sets of dual USB ports headers
on mid-board.
-
I/O Interface
Provides a variety of I/O interfaces:
Ø 1* Floppy interface for 3.5-inch FDD with 720KB, 1.44MB, or 2.88MB
format or for 5.25-inch FDD with 360K or 1.2MB format.
Ø 1*PS/2 mouse connector.
Ø 1*PS/2 Keyboard connector.
Ø 1*RJ45 LAN connector.(MV43N only)
Ø 1*DB9 Serial connectors 16550 UART compatible.
Ø 1*VGA port.
Ø 1*DB25 Parallel port supports Standard Parallel Port and Bi-directional
(SPP), Enhanced Parallel Port (EPP), and Extended Capabilities Port
(ECP) data transmission schemes.
Ø 1*Line-Out port.
Ø 1*Line-In port.
Ø 1*Mic-In port.
Ø 1*MIDI/GAME port.
-
PCI Bus Master IDE Controller Onboard
Two Ultra DMA
133/100
Bus Master Dual-channel IDE ports provide support
to a maximum of four IDE devices (one Master and one Slave per chan
The IDE Bus implements data transfer speeds of up to
133/100
MB/sec and
also supports Enhanced PIO Modes.
80-pin Cable Backward Compatible Legacy ATAPI Devices, ATAPI IDE CD-
ROM, CD-R, CD-RW, and LS-120 Supports.nel).
-
ATX Power Supply Connector
ATX power supply unit can connected to the onboard 20-pin Pentium 4
standard ATX power connectors, supporting Suspend and Soft-On/Off by
dual-function power button.
To Next Page
Loading...
