- 6 -
1.1 To Different Users
First-Time DIY System Builder
Welcome to the DIY world! Building your own computer system is not as diffi-
cult as you may think. To make your first computer DIY experience successful,
right from the start, we have designed the
3.1 Hardware Installation
section
in a step-by-step fashion for all the first-time DIY system builders. Prior to instal-
lation, we also suggest you to read the whole manual carefully to gain a com-
plete understanding of your new Shuttle MV43/MV43N mainboard.
Experienced DIY User
Congratulate on your purchase of the Shuttle MV43/MV43N mainboard. You
will find that installing your new Shuttle MV43/MV43N mainboard is just easy.
Bundled with an array of onboard functions, the highly-integrated MV43/
MV43N mainboard provides you with a total solution to build the most stable
and reliable system. Refer to sections
3.2 Jumper Settings
and
Chapter 4
Drivers/Software Utilities
to find out how to get the best out of your new
mainboard.
Chapter 5 BIOS
Setup
also contains the relevant information on
how to tune up your system to achieve higher performance.
System Integrator
You have wisely chosen Shuttle MV43/MV43N to construct your system. Shuttle
MV43/MV43N incorporates all the state-of-the-art technology of the P4 M266
chipset from VIA. It integrates the most advanced functions you can find to date
in a compact Micro ATX board.
1 INTRODUCTION
This manual adopted in MV43 and MV43N mainboards at the same time.
The difference between MV43 and MV43N is that MV43N equips with
onboard VIA VT6103 LAN PHY. In the manual, if there are some standards,
characters, equipment or software only appeared or adopted by MV43N; it
will be mentioned(MV43N only).
To Next Page
Loading...