5
Permanently saved device parameter set
6
and/or
7
CMC600 parameter cloning module
8
Parameter set in the working memory of the device
9
Factory-set defaults for the device
ß
Opened project file with current device parameter set
à
Saved project file with archived device parameter set
á
Nonvolatile memory
â
Volatile memory
ã
Database on the hard drive, for example (nonvolatile memory)
Lector621 ECO
Parameter set in the
main memory of the
device 6
Permanently saved
parameter set of the
device 5
Factory default setting of
the device 7
Device 2Optional: 1 Computer with SOPAS ET
Configuration Software 3
Parameter memory module
CMC600 4
Volatile memory à
Opened project file
with current parameter
set of the device 8
Volatile memory à
Non-volatile memory ß
Non-volatile memory ß
Saved project file (*.sopas)
with archived parameter
set of the device 9
Data base on e. g. hard drive
(non-volatile memory) á
Permanently saved
parameter set of the
device 5
Non-volatile memory ß
Figure 31: Configuration with SOPAS ET and saving the parameter set (Lector621 Eco)
1
Optional
2
Device
3
Computer with the SOPAS ET configuration software
4
CMC600 parameter cloning module
5
Permanently saved device parameter set
6
Parameter set in the working memory of the device
7
Factory-set defaults for the device
8
Opened project file with current device parameter set
9
Saved project file with archived device parameter set
ß
Nonvolatile memory
à
Volatile memory
á
Database on the hard drive, for example (nonvolatile memory)
NOTE
As part of a data backup plan, always save the current parameter set outside the
device memory. This makes it easier, if necessary (device failure, etc.), to restore, to a
replacement device of the same type, the current parameter set used to date.
External data backup: option 1
To back up the data outside the device memory, the current parameter set can be man‐
ually saved and archived to the computer as a project file (*.sopas file with configura‐
tion data). This is the generally recommended procedure.
External data backup: option 2
COMMISSIONING 7
8022502/15NT/2020-02-11 | SICK O P E R A T I N G I N S T R U C T I O N S | Lector621
55
Subject to change without notice