Type Lector621 Lector621 ECO
Code qualification On the basis of ISO/IEC 16022,
ISO/IEC 15415, ISO/IEC 15416,
ISO/IEC 18004
–
No. of codes per reading
interval
1 ... 50 (auto-discriminating)
No. of characters per read‐
ing interval
500 (for multiplexer function in CAN network operation)
Evaluation time ≥100 μs ≥200 μs
Automatic parameter
switching
Integrated –
11.4 Interfaces
Table 25: Technical data: Interfaces
Lector621 Lector621 ECO
Serial RS-232/RS-422 Function: host 1 (data output of the read result)
Data transmission rate: 0.3 kBd ... 115.2 kBd
Serial RS-232 Function: Aux 1 (service)
1)
Data transmission rate: 57.6 kBd
USB 2.0
2)
Function: Aux 3 (service)
1)
CAN Protocol:
•
A connection in a CANopen-based environment is possible. For
additional support, please contact SICK customer service.
•
SICK CAN sensor network CSN (master/slave, multiplexer/
server)
Function: host (data output of the read result)
Data transmission rate: 20 kBit/s ... 1 MBit/s
Bus length: maximum 30 m
Ethernet Protocol:
•
TCP/IP
•
EtherNet/IP
Function:
•
host 2 (data output of the
read result)
•
Aux 2 (service)
1)
•
FTP (image transfer)
Data transmission rate:
10/100 Mbit/s
MAC address (device-specific),
see type label
–
PROFIBUS Function: host (RS-232, data output of the read result)
Type of fieldbus integration: optionally over external CDF600-21xx
fieldbus module
3)
to bus (RS-485)
Function blocks for various PLC manufacturers are available online
at: www.sick.com/Lector62x
PROFINET (line topology) Function: host (RS-232, data output of read result), PROFINET Sin‐
gle Port, PROFINET Dual Port
Type of fieldbus integration: optionally over external CDF600-2
fieldbus module
3)
)
Data transmission rate: 10/100 Mbit/s
Function blocks for various PLC manufacturers are available online
at: www.sick.com/Lector62x
11 TECHNICAL DATA
68
O P E R A T I N G I N S T R U C T I O N S | Lector621 8022502/15NT/2020-02-11 | SICK
Subject to change without notice
To Next Page
Loading...
