SICK microScan3 Technical Information

1 About this document
1.1 Purpose of this document
This document describes the extended usage possibilities of the microScan3 and out‐
doorSc
an3 safety laser scanner:
•
Output of measurement data and other data via the Ethernet interface
•
Access to variables and methods via CoLa2.
1.2 Scope
This document applies to all microScan3 and outdoorScan3 safety laser scanners.
T
his document is included with the following SICK part numbers (this document in all
available language versions):
•
8022706
1.3 Target groups
This document is written for system specialists working in the field of hardware and
sof
tware development intending to integrate the measurement data or other data and
functions of the safety laser scanner in their application.
1.4 Symbols and document conventions
The following symbols and conventions are used in this document:
Safety notes and other notes
DANGER
Indicates a situation presenting imminent danger, which will lead to death or serious
injuries if not prevented.
WARNING
Indic
ates a situation presenting possible danger, which may lead to death or serious
injuries if not prevented.
CAUTION
Indic
ates a situation presenting possible danger, which may lead to moderate or minor
injuries if not prevented.
NOTICE
Indicates a situation presenting possible danger, which may lead to property damage if
not prevented.
NOTE
Indic
ates useful tips and recommendations.
Instructions to action
b
T
he arrow denotes instructions to action.
1. The sequence of instructions for action is numbered.
2. Follow the order in which the numbered instructions are given.
✓
The check mark denotes the result of an instruction.
1 A
BOUT THIS DOCUMENT
4
T E C H N I C A L I N F O R M A T I O N | microScan3, outdoorScan3 8022708/2019-04-15 | SICK
Subject to change without notice

SICK microScan3 Specifications

General

Brand	SICK
Model	microScan3
Category	Scanner
Language	English