Product description
18 © SICK AG · Germany · All rights reserved · Subject to change without notice
8013889/ZML0/2017-06-
09
Operating Instructions
NAV350 Laser positioning sensor
Chapter 3
3.3 Special features of the NAV350
Special features Specific form
High performance
• Usage on route with max. 12,000 reflectors
• Can be divided into up to 320 layers (as a result downward com-
patible with the NAV200)
• Detection of reflector marks in a scan angle of 360°
• Detection of reflector marks in the measuring range 0.5 m to 70
m (1.64 ft to 229.66 ft)
• Position measurement accuracy ±4 mm (0.16 in) to ±
25 mm
(0.98 in)
(dependent on the average reflector distance)
• Contour measurement up to 35 m (114.83 ft) (for objects with a
remission of 10%)
• Angular accuracy ±0.1°
• Mounting orientation with optical axis parallel to the surface driv-
en over, overhead installation also possible
Safety and
convenience
• Robust, compact metal housing (max. IP 65), CE marking
• Laser class 1
• Maintenance-free
Configuration/
operation
• Configuration using SOPAS ET software for PC
• Alternatively using telegrams (command strings)
• Mapping (teach-in) of reflector positions
Result output Landmark detection
• Reflector measurement and output of the reflector position in the
local co-ordinate system of the NAV350
• Output of distance and angle of a reflector
• Optional: Output of distance, angle and remission value of the sur-
round-ing contour seen
Navigation
• Continuous position determination
• Output of the absolute position value of the NAV350 in a global co-
ordi-nate system
• Optional: Output of distance, angle and remission value of the sur-
round-ing contour seen
Electrical interfaces
• Supply voltage DC 24 V
• Data interfaces: Ethernet, RS-232 serial
• 1 x output signal switching device for synchronisation
Tab. 5: Special features of the NAV350
To Next Page
Loading...
