SICK NAV350

Operating Instructions
NAV350
Commissioning and configuration
8013889/ZML0/2017-06-09
© SICK AG · Germany · All rights reserved · Subject to change without notice 53
Chapter 6
Then adjust the IP configuration for the NAV350 in SOPAS ET.
1. In the NETWORK SCAN ASSISTANT dialog box, under INTERNET PROTOCOL, INTERNET
PROTOCOL,
activate the ENABLE IP COMMUNICATION checkbox and deactivate ENABLE AU
TOIP
che
ckbox
2. Click ADD button.
3. Enter in SINGLE ADRESS 192.168.1.10
4. In the SCAN-ASSTSTANT dialog confirm the settings with OK.
The ADD ADRESS dialog box is closed.
Fig. 31: IP communication with fixed IP address
5. Click ADVANCED... button
6. Under TCP PORT(S) deactivate port 2112 and confirm with OK.