For your safety
10 © SICK AG · Germany · All rights reserved · Subject to change without notice
8013889/ZML0/2017-06-
09
Operating Instructions
NAV350 Laser positioning sensor
Chapter 2
2 For your safety
This chapter deals with your own safety and the safety of the equipment operators.
Please read this chapter carefully before working with the NAV350.
2.1 Authorised personnel
The NAV350 must only be installed, commissioned and serviced by adequately qualified
personnel.
Repairs to the NAV350 are only allowed to be undertaken by trained and authorised service
personnel from SICK AG.
The following qualifications are necessary for the various tasks:
Activities Qualification
Mounting and maintenance
• Basic technical training
• Knowledge of the current safety regulation
s in the
wo
rkplace
Electrical installation and replace-
ment
• Practical electrical training
• Knowledge of current electrical safety regulations
• Knowledge on the use and operation of devices
in
the
related application (e.g. crane, assembly sys-
tem)
Commissioning, operation and con-
figuration
• Knowledge on the use and operation of devices in
the
related application (e.g. crane, assembly sys-
tem)
• Knowledge on the software and hardware environ-
ment in the related application (e.g. crane, assembly
system)
• Basic knowledge of the Windows operating system
• Basic knowledge of data transmission
Tab. 2: Authorised personnel
To Next Page
Loading...
