Operating Instructions
NAV350
Annex
8013889/ZML0/2017-06-09
© SICK AG · Germany · All rights reserved · Subject to change without notice 67
Chapter 10
10.3 Glossary
Download
Transmission of the parameter set that has been modified offline in the SOPAS ET configu-
ration software from the PC to the NAV350. SOPAS ET transmits either always a complete
copy to the memory (RAM) of the NAV350 (menu C
OMMUNICATION, DOWNLOAD ALL PARAMETERS
TO DEVICE) or only the parameter that has just been edited (menu COMMUNICATION, DOWNLOAD
M
ODIFIED PARAMETERS TO DEVICE). With menu NAV350, PARAMETER, SAVE PERMANENT, the param-
eter set is saved permanently in the EEPROM of the NAV350.
Parameter set
Data set using which the functions implemented in the NAV350 are initialised and activat-
ed. Is transmitted from the NAV350 to SOPAS ET and in the reverse direction using U
PLOAD
or D
OWNLOAD respectively.
Remission
Remission is the quality of reflection at a surface. The basis is the Kodak standard, known
worldwide in, among other areas, photography. The surface-related magnitude of the remis-
sion is the remission value.
Scan
A scan includes all measured values determined related to the scan angle.
SOPAS ET
Configuration software, used for the offline configuration (adaptation to the read situation
on-site) and the online operation of the NAV350 in dialog mode.
Upload
Transmission of the parameter set from the NAV350 to the PC into the SOPAS ET configu-
ration software. The values for the parameters are displayed on the file cards of the config-
uration software. Prerequisite for the modification of the current parameter set.
To Next Page
Loading...
