Parameter Factory setting
Yes, no No
8.5 Device
8.5.1 User level
Easy / Advanced
Only certain functions are available depending on the user level set:
•
Easy: frequently required functions (factory setting)
•
Advanced: virtually all available functions
Changing the user level only affects operation via display and via SOPAS ET. All func‐
tions can always be used for operation and configuration via IO-Link.
> Device > > User level >
Parameter Factory setting
Easy, Advanced Easy
8.5.2 Reset
The device can be reset to the factory settings or to saved customer settings (see "Saving
customer settings", page 51).
NOTE
Upon confirmation that the device is to be reset, it carries out a warm start. During the
device restarting process, the device and its function are temporarily deactivated.
> Device > > Reset > > Factory settings >
> Device > > Reset > > Customer settings >
Parameter Factory setting
Yes, no -
8.5.3 Saving customer settings
Once settings have been made, they can be saved as customer settings. These settings
can be restored at any time via Reset> Customer settings.
> Device > > Save customer settings >
OPERATION VIA DISPLAY 8
8019642/ZJW1/2017-04-03 | SICK O P E R A T I N G I N S T R U C T I O N S | OD1000
51
Subject to change without notice
To Next Page
Loading...
Need help?
General
