SICK OD2000

O P E R A T I N G I N S T R U C T I O N S
OD2000
Displacement measurement sensor

SICK OD2000 Specifications

General

Brand	SICK
Model	OD2000
Category	Accessories
Language	English

Summary

About this Document

Operating Instructions Overview

Provides information on using SICK AG devices and safety prerequisites.

Further Information Resources

Safety Information

Intended Use and Improper Use

Details correct usage, identifies improper use, and lists potential dangers.

Cybersecurity and Liability Limitations

Discusses cybersecurity threats and manufacturer liability for product use.

Modifications, Personnel Requirements, and Hazards

Laser and Electrical Safety Warnings

Grounding Safety and Device Warning Signs

Product Description

Scope of Delivery and Product Identification

Lists package contents and explains how to identify the device via its type label.

Type Code, Variants, and Principle of Operation

Measurement Principle and Output Data

Display and Control Elements Overview

Status LEDs and Pushbutton Functions

Transport and Storage

Handling and Inspection Procedures

Covers transport, unpacking, and inspection guidelines to prevent damage.

Storage Guidelines

Details requirements for storing the device to maintain its condition.

Mounting Instructions

Device Mounting Steps

Provides instructions for mounting, connecting power, and initial alignment.

Electrical Installation

Wiring and Pin Assignment Details

Explains wiring instructions and the pin assignment for the device connector.

Connecting the Device Electrically

Device Operation Basics

Operation via Pushbuttons and RUN Mode

Describes basic operation using pushbuttons and the RUN mode interface.

Quick Menu Functions and Settings

Main Menu Navigation and Parameter Setting

Button Lock and IO-Link Operation

IO-Link Process Data

Details the process data telegram format and content for IO-Link communication.

IO-Link Device Data and SOPAS ET Usage

Detailed Operation Guide

Measurement Menu: Cycle Time

Explains setting the measurement cycle time and its impact on output rate.

Average Filter Settings

Median Filter and Measurement Direction

Measured Value Offset Adjustment

Details how to shift the zero point of the relative distance value.

Region of Interest (ROI) Configuration

Error Mode and Substitute Value Settings

Output Channel Q1 Q2 Settings

Switch Point Logic and Timer Modes

Configures switch point logic and timer modes for digital outputs.

Hysteresis and Q1 Output Modes

Setting the Q1 Switching Point

Explains how to teach-in or manually set switching points for the Q1 output.

Q1 Single Point Switching

Q1 Window (SP1,SP2:Window) Operation

Q1 Window (SP1:0 bSB) Operation

Q1 Alarm and Signal Level Warnings

Q1 Edge Height Jump Function

Q2 Qa Output Configuration

Analog Value Setting Procedures

Explains how to teach-in or manually set analog values for output.

Qa Analog 4-20 mA and 0-10 V Settings

Input Functionality

IN Input Function and Logic

Configures the IN input function, logic, and behavior.

IN Hold Function Menu Options

Peak Value Hold Functions

Average and Normal Hold Functions

Device Management Functions

Device Reset and Save Settings

Describes how to reset the device to factory or save custom settings.

Language, Display, and Sender Settings

Output Logic and Status Information

Maintenance and Cleaning

Device Cleaning Procedures

Provides instructions for safely and effectively cleaning the device.

Maintenance Plan Overview

Outlines preventive maintenance tasks and their recommended intervals.

Troubleshooting and Support

Fault Diagnosis and Remedies

Describes common faults, troubleshooting steps, and contact info for SICK Service.

Service Information and Returns

Lists device information needed for service and outlines the return process.

Repair Guidelines and Disposal

Technical Specifications

Mechanical and Electronic Data

Lists specifications like supply voltage, dimensions, enclosure rating, and electrical safety.

Dimensional Drawings and Performance Data

Performance Details: Repeatability, Linearity, Interfaces

Output Specifications and Ambient Conditions

Interference Range: OD2000-030 xxxx

Interference Range: OD2000-050 xxxx

Interference Range: OD2000-130 xxxx

Interference Range: OD2000-245 xxxx

Interference Range: OD2000-350 xxxx

Interference Range: OD2000-700 xxxx

Light Spot Size: OD2000-030 xxxx

Illustrates the typical light spot size for the OD2000-030xxxx model.

Light Spot Size: OD2000-050 xxxx

Light Spot Size: OD2000-130 xxxx

Light Spot Size: OD2000-245 xxxx

Light Spot Size: OD2000-350 xxxx

Linearity Diagrams

Light Spot Size: OD2000-700 xxxx

Illustrates the typical light spot size for the OD2000-700xxxx model.

Linearity Diagram: OD2000-050 xxxx

Shows linearity deviation for the OD2000-050xxxx model.

Linearity Diagram: OD2000-130 xxxx

Shows linearity deviation for the OD2000-130xxxx model.

Linearity Diagram: OD2000-245 xxxx

Linearity Diagram: OD2000-350 xxxx

Linearity Diagram: OD2000-700 xxxx

Accessories Information

Annex Content

Quick Menu Structure Diagram

Presents a visual diagram of the quick menu navigation path.

Main Menu Structure Overview

Conformity and License Information