WARNING
Risk of injury and damage caused by potential equalization currents!
Improper grounding can lead to dangerous equipotential bonding currents, which may
in turn lead to dangerous voltages on metallic surfaces, such as the housing. Electrical
voltage can cause severe injury or death.
■
Work on electrical systems must only be performed by qualified electricians.
■
Follow the notes in the operating instructions.
■
Install the grounding for the product and the system in accordance with national
and regional regulations.
2.8 Warning signs on the device
Depending on the device type, it has a laser of class 2 or class 1 installed. The housing
is labeled with a corresponding warning sign.
If the warning label is obscured by the installation of the device in a machine or system,
attach additional warning labels next to the laser output aperture on the machine or
system so that they are clearly visible.
LASER APERTURE
Manufactured in : December, 2020
Place of manufacture : OF
D-79183 Waldkirch, Germany
AGSICK
in Laser Notice No. 56, dated May 8, 2019
for conformance with IEC 60825-1 Ed. 3., as described
Complies with 21 CFR 1040.10 and 1040.11except
LASER
EN/IEC 60825-1:2014
1
3
2
4
5
Figure 1: Laser warning sign laser class 1
1
Warning sign laser class 1
2
EN/IEC 60825-1:2014
3
Complies with 21CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1
Ed. 3, as described in document Laser Notice No. 56 dated 8May2019.
4
Laser output aperture
5
Manufacturer, production site, date of manufacture
2 SAFETY INFORMATION
10
O P E R A T I N G I N S T R U C T I O N S | OD2000 8026231/1I18/2023-01-05 | SICK
Subject to change without notice
To Next Page
Loading...
Need help?
General
