The connection diagram, and information on inputs and outputs, can be found on the
side plate on the device.
6.3 Connecting the device electrically
Prerequisites
•
Observe the wiring instructions, see "Wiring instructions", page 18.
Approach
1. Ensure that the voltage supply is not connected.
2. Connect the device according to the connection diagram.
3. Connect the supply voltage.
ELECTRICAL INSTALLATION 6
8026231/1I18/2023-01-05 | SICK O P E R A T I N G I N S T R U C T I O N S | OD2000
19
Subject to change without notice
To Next Page
Loading...
Need help?
General
