SICK OD2000 User Manual

Parameter Value Factory setting
Reset Customer settings No
Yes
-
7.4.6.2 Save customer settings menu
Once settings have been made, they can be saved as customer settings. These settings
can be restored at any time, see "Reset the device", page 45.
> Device > > Save customer settings > > Select option >
Parameter Value Factory setting
Save customer settings No
Yes
-
7.4.6.3 Language menu
The language of the display texts can be set.
> Device > > Language >
Parameter Value Factory setting
Language English
German
Spanish
Japanese
Chinese
English
7.4.6.4 Display settings
Various settings for the display behavior are available.
> Device > > Display setting >
Parameter Value Factory setting
Display decimal digits 0, 0.1, 0.01 0.1
Eco mode Off, 10sec, 20sec, 60sec, 300sec,
1,200sec, 3,600sec
300sec
Display brightness 10%, 20%, 30%, 40%, 50%, 60%, 70%,
80%, 90%, 100%
30%
Turn display 0°, 180° 0°
7.4.6.5 Sender menu
The sender (measuring laser) can be switched off. No measurement is possible with the
sender switched off.
The sender can also be switched on and off via the IN Input.
> Device > > Sender > > Select option >
Parameter Value Factory setting
Sender Off
To
To
7.4.6.6 Output PNP/NPN/PP menu
The output logic can only be set via the display. The NPN setting is incompatible with
most commercially available IO-Link master components.
7 OPERATION
46
O P E R A T I N G I N S T R U C T I O N S | OD2000 8026231/1I18/2023-01-05 | SICK
Subject to change without notice

SICK OD2000 Specifications

General

Brand	SICK
Model	OD2000
Category	Accessories
Language	English