SICK OD2000

Average value menu
Hold the arithmetic average value of all measured values that are present in the time
interval between the last falling edge and the HIGH input status (next rising edge).
1
2
3
4
5
IN HIGH
IN LOW
1
Measured value
2
Output hold value
3
Interval in which an analysis is carried out.
4
HIGH input status
5
LOW input status
Normal menu
Hold the measured value until the next falling edge.
1
4
5
IN HIGH
IN LOW
2
3
1
Measured value
2
Internal measured value
3
Output hold value
4
HIGH input status
5
LOW input status
Setting the IN Hold function
To use the hold function, set IN function Hold.
> IN input > > IN function > > Hold >
Set a hold function via the IN Hold function parameter.
> IN Input > > IN Function > > IN Hold function > > Select option >
7 OPERATION
44
O P E R A T I N G I N S T R U C T I O N S | OD2000 8026231/1I18/2023-01-05 | SICK
Subject to change without notice