4. Control software of a PLC controller
■
The controller of a fieldbus (e.g. PLC) configures the device. For a PROFINET con‐
troller, for example, this is done via PROFINET by means of GSD parameterization.
Backup of the parameter set as a configuration file in the PROFINET controller. The
controller reconfigures the device at every PROFINET restart.
■
Integrating the device into the most important fieldbus systems is made simpler
with SICK function blocks for the relevant bus controller. See the “Downloads /
Software” section online at:
°
www.sick.com/RFU62x
■
Function blocks based on command strings (CoLa).
5. SICK AppStudio development environment
■
Used, for example, to implement user-specific data output protocols for the device.
Based on functionality already pre-installed in the programmable device.
■
The app programmed using SICK AppStudio is loaded onto the device as a sensor
app.
■
More information is available online at: www.sick.com/SICK_AppStudio
OPERATION 8
8015930/ZTM0/2018-11-06 | SICK O P E R A T I N G I N S T R U C T I O N S | RFU62x
75
Subject to change without notice
To Next Page
Loading...
