SICK RFU62 Series

•
RFU65x-101xx (device with internal antenna)
It is not possible to connect an external antenna.
The device types differ with respect to the following region-related, non-modifiable fea‐
tures:
•
Radio equipment approval
•
Carrier frequency range
•
Maximum transmitting power of the internal antenna
3.2 Product characteristics
3.2.1 Device view
RFU63x-131xx
1 2 3
à
ß
4 5 6
8
8
9
238.6 (9.40)
64.3 (2.53)
238.6 (9.40)
7
Figure 3: RFU630-131xx (with internal antenna): design and device dimensions, all dimensions
in mm or inch
1
3 x “external” antennae connection (female connector, TNC reverse)
2
“Power/Serial Data/CAN/I/O” connection (male connector, M12, 17-pin, A-coded)
3
“Ethernet” connection (female connector, M12, 4-pin, D-coded)
4
Cover with internal antenna
5
1 x LED, multi-colored (process feedback)
6
7 x LED, multi-colored (status indicator)
7
Acoustic opening of the beeper, under a cover film
8
3 x M5 blind tapped hole, 8 mm deep, for mounting the device
9
4 x M6 blind tapped hole, 11 mm deep, for alternative mounting of the device
ß
“USB” connection (female connector, 5-pin, type Micro-B) and slot for microSD memory
card, behind screw-mounted cover. USB interface as a temporary servicing interface only.
à 2 x function buttons (Step ▾ and Enter p)
PRODUCT DESCRIPTION 3
8014335/ZTL9/2018-10-14 | SICK O P E R A T I N G I N S T R U C T I O N S | RFU63x, RFU65x
17
Subject to change without notice